• E3S AT11 1 1 1
  • E3S AT11 2
  • E3S AT11 1 1 1
  • E3S AT11 2

Omron Photoelectric Sensor E3S-AD18 E3S-AD16 E3S-AD17 E3S-AD38 E3S-AD36 E3S-AD37

Series#: Omron Photoelectric Sensor

Product Details

Qty:

Specification

 

Sensing method

Through-beam Sensors Retro-reflective Sensors

(with MSR function)

 

Diffuse-reflective Sensors

Model  Item E3S-AT11, 16, 21, 31,

36, 41, 61, 66, 71, 81,

86, 91

E3S-AR11, 16, 21, 31,

36, 41, 61, 66, 71, 81,

86, 91

E3S-AD13, 18, 23, 33,

38, 43, 63, 68, 73, 83,

88, 93

E3S-AD11, 16, 21, 31,

36, 41, 61, 66, 71, 81,

86, 91

E3S-AD12, 17, 22, 32,

37, 42, 62, 67, 72, 82,

87, 92

 

Sensing distance

 

7 m

2 m (100 mm) *1 (When using E39-R1) 100 mm (wide view) (white paper 100 ´ 100 mm) 10 to 200 mm (white paper 100 ´ 100 mm) 700 mm

(white paper 200 ´

200 mm)

Standard sensing object Opaque:

10-mm dia. min.

Opaque:

75-mm dia. min.

Differential travel 20% max. of sensing distance 10% max. of sensing distance 20% max. of sensing distance
Directional angle Both Emitter and Receiver: 3° to 15° 3 to 10°
Light source (wavelength) Red LED (700 nm) Infrared LED (880 nm) Red LED (700 nm) Infrared LED (880 nm)
Power supply voltage 10 to 30 VDC, including ripple (p-p) 10%
 

Current consumption

Both Emitter and Receiver: 20 mA max. (plus approx. 15 mA with turbo function) 30 mA max. (plus approx. 15 mA with turbo function)  

35 mA max.

30 mA max. (plus approx. 15 mA with turbo function)  

35 mA max.

Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (residual voltage: 1 V max.) Open-collector output (NPN or PNP depending on model), Light-ON/Dark-ON selectable
Self-diagnostic output (Only on Sensors with self-diagnos- tic outputs) (Only Sensors with self-diagnostic function) Load power supply voltage: 30 VDC max., Load current: 50 mA max. (residual voltage: 1 V max.),

Open-collector output (NPN or PNP depending on model)

 

Protection circuits

Power supply reverse polarity protection, Output short-circuit protection  

Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention

Response time Operation or reset: 0.5 ms max.
Sensitivity adjustment Two-turn endless adjuster with an indicator
Timer function (Only on Sen- sors with the timer function) 0 to 100 ms OFF-delay variable adjuster
Turbo function (Only on Sen- sors with the turbo function) Yes (with turbo switch)
Ambient illumination (Receiv- er side) Incandescent lamp: 5,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature Operating: -25°C to 55°C (with no icing or condensation) Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% (with no condensation) Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance (destruction) 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction) Destruction: 500m/s2, 3 times each in X, Y, and Z directions
Degree of protection IEC IP67; NEMA: 4X (indoors only) *2
Connection method Pre-wired (standard length: 2 m) or M12 connector
 

Weight (packed state)

Pre-wired cable: Approx. 150 g Connector: Approx. 70 g Pre-wired cable: Approx. 110 g Connector: Approx. 60 g Pre-wired cable: Approx. 90 g Connector: Approx. 50 g
Accessories Mounting bracket (with screws), Sensitivity adjustment driver, Sensitivity adjusting knob, Instruction sheet, Close mounting plate (only for Sensors with connectors), and Reflector (only for Retro-reflective Sensors)

 

Unmatched Customer Service

s03-icon1

After Hours Shipping

s03-icon1

Real Time Order Tracking

s03-icon1

Flexible Delivery Options

s03-icon1

Intact Technical Supports

Boost Your Business With Industrial Automation Products From United Automation

  • Best-in-class sourcing
  • MOQ starts from 1 piece
UP