Type |
Standard |
L-shaped |
T-shaped, slot center 7 mm | Close-mount- ing | T-shaped, slot center 10 mm |
F-shaped |
R-shaped |
|
NPN | EE-SX970-C1 | EE-SX971-C1 | EE-SX972-C1 | EE-SX974-C1 | EE-SX975-C1 | EE-SX976-C1 | EE-SX977-C1 | |
PNP | EE-SX970P-C1 | EE-SX971P-C1 | EE-SX972P-C1 | EE-SX974P-C1 | EE-SX975P-C1 | EE-SX976P-C1 | EE-SX977P-C1 | |
Sensing distance | 5 mm (slot width) | |||||||
Sensing object | Opaque: 2 ´ 0.8 mm min. | |||||||
Differential distance | 0.025 mm max. | *1 | ||||||
Light source (Peak wave- length) | Infrared LED with a peak wavelength of 940 nm | |||||||
Indicator | Light indicator (orange LED) | |||||||
Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | |||||||
Current consumption | 21 mA max. | |||||||
Control output |
Load power supply voltage: 5 to 24 VDC, Load current: 50 mA max., Off-state current : 0.5mA max,
50 mA load current with a residual voltage of 1.0 V max., 5 mA load current with a residual voltage of 0.4 V max. |
|||||||
Protection circuit | Power supply reverse polarity protection; output reverse polarity protection; overcurrent protection (only OUT2 on models with NPN output) | |||||||
Response frequency | 1 kHz min. (3 kHz average) *2 | |||||||
Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver | |||||||
Ambient temperature range | Operating: -25 to 55°C Storage: -30 to 80°C (with no icing or condensation) | |||||||
Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% (with no icing or condensation) | |||||||
Vibration resistance (De- struction) | 10 to 2,000 Hz 0.75-mm single amplitude (15-min periods, 10 cycles) each in X, Y, and Z directions | |||||||
Shock resistance (De- struction) | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | |||||||
Degree of protection | IEC 60529 IP50 | |||||||
Connecting method | Connector | |||||||
Weight (Packed state) | Approx. 3 g | |||||||
Case/Cover | Polybutylene terephthalate (PBT) | |||||||
Emitter/receiver | Polycarbonate (PC) |