After Hours Shipping
Real Time Order Tracking
Flexible Delivery Options
| Type | Standard model | Auxiliary sensor connectable model | |||||
| Type | With external control function | Long sensing range |
|||||
| Type | Short sensing range | Short sensing range | |||||
| Model No. | PX-22 | PX-21 | PX-24 | PX-24ES | PX-23ES | PX-26 | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||||||
| Sensing range (OUT 1 and OUT 2 areas) (Note 2) | 3 m 9.843 ft | 1 m 3.281 ft | 3 m 9.843 ft | 1 m 3.281 ft | 5 m 16.404 ft | ||
| Hysteresis (Note 2) |
15 % or less of operation distance | ||||||
| Supply voltage | 10 to 31 V DC including ripple | ||||||
| Power consumption (Note 3) |
Under operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor) | ||||||
| OUT1 (OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas) OUT2 (OR circuit among the effective center, left and right OUT 2 areas) |
NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 40 V DC or less (between OUT 1 / OUT 2 and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||||||
|
Utilization category |
DC-12 or DC-13 | ||||||
| Output operation | Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.) | ||||||
| Short-circuit protection | Incorporated | ||||||
| Extraneous light monitor output |
– | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 40 V DC or less (between extraneous light monitor output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
|||||
|
Output operation |
– | ON when modulated beam other than its own (including auxiliary sensor’s) light is received | |||||
| Short-circuit protection | – | – | |||||
| Response time | 80 ms or less | ||||||
| Operation indicatorsOUT 1 area |
Red LED (lights up when the beam is received in the effective OUT 1 areas) | ||||||
| OUT 2 area | Yellow LED (lights up when the beam is received in the effective OUT 2 areas) | ||||||
| Sensitivity adjuster | Continuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.) | ||||||
| External sensitivity adjustment function | – | Sensitivity adjustment is possible with an analog input. | |||||
| Sensing area | Four sensing areas are selectable with dip switches. | Four sensing areas are selectable with dip switches, and eight sensing areas are selectable with external inputs. | Fixed | ||||
| Sleep function | Operating / sleep selectable with external input | ||||||
| Automatic interference prevention function | Optical interference from up to 25 units is prevented. | ||||||
|
Pollution degree |
3 (Industrial environment) | ||||||
| Protection | IP65 (IEC) | ||||||
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | ||||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||||
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | ||||||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||||
| Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||||||
| Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | ||||||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||||||
| Emitting element | Infrared LED (Peak emission wavelength: 950 nm 0.037 mil, modulated) | ||||||
| Material | Enclosure: ABS, Lens: Acrylic, Cover: Polycarbonate | ||||||
| Cable | 0.3 mm2 5-core cabtyre cable, 0.5 m 1.640 ft long (for input and output) | For input and output: 0.18 mm2 9-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m 1.640 ft long For auxiliary sensor connection: 0.18 mm2 10-core connector attached cabtyre cable, 0.5 m 1.640 ft long |
|||||
| Cable extension | Extension up to total 100 m 328.084 ft (10 m 32.808 ft for auxiliary sensor connection) is possible with 0.3 mm2, or more, cable. | ||||||
| Weight | Net weight: 210 g approx. Gross weight: 390 g approx. |
Net weight: 220 g approx. Gross weight: 400 g approx. |
Net weight: 210 g approx. Gross weight: 390 g approx. |
||||
| Accessories | MS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Matrix chart for sensing areas and external inputs: 1 sheet (PX-24ES and PX-23ES only) | ||||||
English
Deutsch
한국어