Delta ASDA-B2 Servo Drive ASD-B2L | 100W | 200W | 400W | 750W | 1kW | 1.5kW | 2kW | 3kW |
Delta ASDA-B2 Servo Drive ASD-B2L | 01 | 02 | 04 | 07 | 10 | 15 | 20 | 30 |
Phase / Voltage | Three-phase: 170 ~ 255VAC, 50/60Hz ±5%Single-phase: 200 ~ 255VAC, 50/60Hz ±5% | Three-phase: 170 ~ 255VAC,50/60Hz ±5% | ||||||
Continuous Output Current | 0.9Arms | 1.55Arms | 2.6Arms | 5.1Arms | 7.3Arms | 8.3Arms | 13.4Arms | 19.4Arms |
Cooling System | Natural Air Circulation | Fan Cooling | ||||||
Encoder Resolution / Feedback Resolution | 17-bit (160000 p/rev) | |||||||
Control of Main Circuit | SVPWM Control | |||||||
Tuning Modes | Auto / Manual | |||||||
Dynamic Brake | – | Built-in | ||||||
Max. Input Pulse Frequency | Line driver: Max. 500Kpps (low speed)/ Max.4Mpps(high speed) Open collector: Max. 200Kpps | |||||||
Pulse Type | Pulse + Direction, A phase + B phase, CCW pulse + CW pulse | |||||||
Command Source | External pulse train / Internal parameters | |||||||
Smoothing Strategy | Low-pass filter | |||||||
Electronic Gear | Electronic gear N/M multiple N: 1 ~ (226-1)/M:1 ~ (231-1)1/50 < N/M < 25600 | |||||||
Torque Limit Operation | Set by parameters | |||||||
Feed Forward Compensation | Set by parameters | |||||||
Analog Input CommandVoltage Range | 0 ~ ±10 VDC | |||||||
InputResistance | 10KW | |||||||
Time Constant | 2.2 us | |||||||
Speed Control Range*1 | 1:5000 | |||||||
Command Source | External analog signal / Internal parameters | |||||||
Smoothing Strategy | Low-pass and S-curve filter | |||||||
Torque Limit Operation | Set by parameters or via Analog input | |||||||
ResponsivenessCharacteristic | Maximum 550Hz |