Home>
Servo Drive>
Delta Servo Drive>
Delta ASDA-B3 Servo Drive 400w DMCNET ASD-B3-0421-F

Delta ASDA-B3 Servo Drive 400w DMCNET ASD-B3-0421-F

Series#: Delta Servo Drive

Product Details

Delta ASDA-B3 Servo Drive 400w DMCNET ASD-B3-0421-F
We are First Class Delta Servo Drive dealer and Delta Servo Drive distributor in China.
We can Supply Delta electric automation parts,such as Delta PLC,Delta Servo Motor,Delta HMI,Delta VFD and So on,
100% Original and new,In stock by Delta Electric
Delivery time: Ready in stock and 1 days for ship out
MOQ: 1pcs

Qty:

Add to Enquiry Cart

Specification

Download A Munual

Delta ASD-B3 servo Drive	100 W	200 W	400 W	750 W	1 kW	1.5 kW	2 kW	3 kW
Delta ASD-B3 servo Drive	01	02	04	07	10	15	20	30
Phase / Voltage	Single-phase / Three-phase 220VAC						Three-phase 220VAC
Permissible Voltage	Single-phase / Three-phase 200 – 230VAC, -15% to 10%						Three-phase200 – 230VAC, -15% to 10%
Input Current (3PH) (Unit: Arms)	0.81	1.61	4.32	8.76	9.21	9.72	14.7	16.68
Input Current (1PH) (Unit: Arms)	1.39	2.77	8.28	16.68	17.49	18.72
Continuous Output Current (Unit: Arms)	0.9	1.55	2.65	5.1	7.3	8.3	13.4	19.4
Max. Instantaneous Output Current (Unit: Arms)	3.88	7.07	10.6	16.4	21.21	27	38.3	58.9
Cooling Method	Natural cooling				Fan cooling
Drive Resolution	24-bit (16,777,216 pls / rev)
Main Circuit Control	SVPWM control
Tuning Mode	Auto / Manual
Regenerative Resistor	N / A		Built-in
Pulse Type (only for pulse control mode)	Pulse + Direction; A phase + B phase; CCW pulse +CW pulse
Max. Output Pulse Frequency (only for pulse control mode)	Pulse + direction: 4 Mpps; CCW pulse + CW pulse: 4 Mpps; A phase + B phase: single-phase 4 Mpps; Open collector: 200 Kpps
Command Source	External pulse (only for pulse control mode) / Internal register (PR mode)
Smoothing Method	Low-pass, S-curve, and moving ﬁlters
E-Gear Ratio	E-Gear ratio: N / M times, limited to (1 / 4 < N / M < 262144) N: 1 – 536870911 / M: 1 – 2147483647
Torque Limit	Parameter settings
Feed Forward Compensation	Parameter settings
Analog Monitor Output	Monitoring signal can be set with parameters (voltage output range: ±8V); resolution: 10-bit
Protection Function	Overcurrent, Overvoltage, Undervoltage, Overheat, Regeneration error, Overload, Excessive speed deviation, Excessive position deviation, Encoder error, Adjustment error, Emergency stop, Forward / reverse limit error, Serial communication error, RST leak phase, Serial communication timeout, Short- circuit protection for terminals U, V, W
Communication Interface	USB / RS-485 / CANopen / DMCNET / EtherCAT
Installation Site	Indoors (avoid direct sunlight), no corrosive vapor (avoid fumes, ﬂammable gases, and dust)
Altitude	Altitude 2000 m or lower above sea level
Atmospheric Pressure	86 kPa – 106 kPa
Operating Temperature	0ºC to 55ºC (If operating temperature is above 45ºC, forced cooling is required)
Storage Temperature	-20ºC to 65ºC
Humidity	0 to 90% RH (non-condensing)
Vibration	9.80665 m / s2 (1 G) less than 20 Hz, 5.88 m / s2 (0.6 G) 20 to 50 Hz
IP Rating	IP20
Power System	TN system 34
Certiﬁcations	IEC/EN 61800-5-1, UL 508C