Model | DL-RS1A*1 | |
Synchronization between the transmitter and receiver | Asynchronous | |
Transmission code | ASCII | |
Baud rate | 2,400/4,800/9,600/19,200/38,400 bps selectable (Factory-setting: 9,600 bps) | |
Data bit length | 8 bits/7 bits selectable (Factory-setting: 8 bits) | |
Parity check | None/Even/Odd selectable (Factory-setting: None) | |
Stop bit length | 1 bit | |
Data delimiter | Data reception: automatically recognizes CR or CR+LF Data transmission: Fixed to CR+LF |
|
Indicator | Communication indicator lamp (green x 2), Alarm indicator lamp (red), Power indicator lamp (green) |
|
Sensor connection specificationsNumber of connectable sensor units |
Up to 15 units (including main unit) | |
Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier) | |
Power consumption | 25 mA max. | |
Ambient temperature | -10 to +55 °C 14 to 131 °F | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions | |
Materials | Case/Polycarbonate | |
Weight | Approx. 53 g | |
Communication method | Full duplex | |
Model | DL-DN1*1 | |
Network power supply | 11 to 25 VDC (supplied from DeviceNetTM communication power supply) | |
Indicator | Network status indicator: 2-color (green/red) LED, Module status indicator: 2-color (green/red) LED, Sensor communication indicator: 2-color (green/red) LED |
|
Connectable sensors | Sensor amplifiers with D-bus support*2 | |
Number of connectable sensor units | Up to 15 units | |
Compliant functions | Remote I/O communication (polling) Explicit messaging | |
Address setting | 0 to 63 (PGM compatible) | |
Baud rate (automatically switched) | 500 kbps/250 kbps/125 kbps | |
Power voltage | 20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier) | |
Power consumption | 660 mW or less (at 30 V, 22 mA max.) | |
Pollution degree | 2 | |
Ambient temperature | -20 to +55 °C -4 to 131 °F (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions | |
Materials | Main unit case and dust cover: Polycarbonate, DeviceNetTM connector: Polyamide (plug), PUT (socket) | |
Weight | Approx. 80 g |