Sensing method | BGS Reflective | ||
NPN output | E3ZM-CL61H (-M1TJ) | E3ZM-CL62H (-M1TJ) | E3ZM-CL64H (-M1TJ) |
PNP output | E3ZM-CL81H (-M1TJ) | E3ZM-CL82H (-M1TJ) | E3ZM-CL84H (-M1TJ) |
Sensing distance | 10 to 100 mm
(White paper 100 ´ 100 mm) |
10 to 150 mm
(White paper 100 ´ 100 mm) |
10 to 200 mm
(White paper 100 ´ 100 mm) |
Spot diameter | 4-mm dia. at sensing distance of 100 mm | 12-mm dia. at sensing distance of 150 mm | 18-mm dia. at sensing distance of 200 mm |
Standard sensing object | — | ||
Differential travel | 3% of sensing distance max. | 15% of sensing distance max. | 20% of sensing distance max. |
Reflectivity characteristics (black/white error) | 5% of sensing distance max. | 10% of sensing distance max. | 20% of sensing distance max. |
Directional angle | — | ||
Light source (wavelength) | Red LED (650 nm) | Red LED (660 nm) | |
Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | ||
Current consumption | 25 mA max. | ||
Control output |
Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2 V max.) Open-collector output (NPN/PNP output depending on model)
Light ON/Dark ON cable connection selectable |
||
Protection circuits | Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, Mutual interference protection | ||
Response time | Operate or reset: 1 ms max. | ||
Sensitivity adjustment | — | ||
Ambient illumination (Receiver side) | Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | ||
Ambient temperature range | Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation) | ||
Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||
Insulation resistance | 20 MΩ min. at 500 VDC | ||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||
Degree of protection * | IEC IP67 (oil resistance to OMRON standards), DIN 40050-9: IP69K | ||
Connection method | Pre-wired (standard length: 2 m), -M1TJ: Pre-wired connector (standard length: 300-mm) | ||
Indicators | Operation indicator (yellow), Stability indicator (green) | ||
Weight (packed state)
Pre-wired models |
Approx. 90 g | ||
Housing material | SUS316L | ||
Cable material | Oil-resistant vinyl cable | ||
Lens material | PMMA (polymethylmethacrylate) | ||
Indicator material | PEI (Polyetherimide) | ||
Seal material | Fluoro rubber | ||
Accessories | Instruction sheet (Note: Mounting Brackets are sold separately.) |