Item Model | TL-W5MD@ |
Sensing distance | 5 mm ±10% |
Set distance | 0 to 4 mm |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 5.) |
Standard sensing object | Iron, 18 ´ 18 ´ 1 mm |
Response frequency *1 | 500 Hz |
Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. |
Leakage current | 0.8 mA max. |
Load current | 3 to 100 mA |
Residual voltage | 3.3 V max. (under load current of 100 mA with cable length of 2 m) |
Indicators | D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red) |
Operation mode (with sensing object approaching) | D1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 5 for details. D2 Models: NC |
Protection circuits | Load short-circuit protection, Surge suppressor |
Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) *2 |
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) |
Temperature influence | ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C |
Voltage influence | ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range |
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
Dielectric strength | 1,000 VAC for 1 min between current-carrying parts and case |
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant *2 |
Connection method | Pre-wired Models (Standard cable length: 2 m) |
Weight (packed state) | Approx. 80 g |