Type | Thru-beam | |
Type | Minute object detection | Long sensing range |
NPN output | EX-L211 | EX-L212 |
PNP output | EX-L211-P | EX-L212-P |
CE marking directive compliance | EMC Directive, RoHS Directive | |
Sensing range | 1 m 3.281 ft | 3 m 9.843 ft |
Emission spot size (Typical) | Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m) |
Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note 2) |
Sensing object | Opaque object of ø2 mm ø0.079 in or more | Opaque object of ø3 mm ø0.118 in or more |
Minimum sensing object (Typical) (Note 3) |
Opaque object of ø0.3 mm ø0.012 in | – |
Repeatability | Perpendicular to sensing axis: 0.05 mm 0.0020 in or less | |
Repeatability (Typical) (perpendicular to sensing axis) (Note 3) |
0.01 mm 0.0004 in or less (all area) |
– |
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | |
Current consumption | Emitter: 10 mA or less, Receiver: 10 mA or less | |
Output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 26.4 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current)<PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 26.4 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current) |
|
Output operation |
Light-ON / Dark-ON selectable by the output operation switching input | |
Short-circuit protection | Incorporated (short-circuit protection / inverse polarity protection) | |
Response time | 0.5 ms or less | |
Operation indicator | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) | |
Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) | |
Power indicator | Green LED (lights up when the power is ON) (incorporated on the emitter) | |
Sensitivity adjuster | Continuously variable adjuster (receiver) | – |
Protection | IP67 (IEC) | |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each | |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |
Emitting element | Red semiconductor laser Class 1 (IEC / JIS/ FDA) (Note 4) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil) |
|
Material | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate | |
Cable | 0.15 mm2 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long | |
Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver). | |
Weight | Net weight: Emitter; 40 g approx., Receiver; 40 g approx., Gross weight: 90 g approx. |
|
Accessory | MS-EXL2-2 (Mounting plate): 2 pcs. |