Type | Measurement center 30mm type |
Measurement center 50mm type |
Measurement center 100mm type |
NPN output | HG-C1030 | HG-C1050 | HG-C1100 |
PNP output | HG-C1030-P | HG-C1050-P | HG-C1100-P |
Regulatory compliance and certification | EMC Directive, RoHS Directive, FDA Regulations, UL/c-UL certification (Note 4) | ||
Measurement center distance | 30 mm 1.181 in | 50 mm 1.969 in | 100 mm 3.937 in |
Measurement range | ±5 mm 0.197 in | ±15 mm 0.591 in | ±35 mm 1.328 in |
Repeatability | 10 μm 0.394 mil | 30 μm 1.181 mil | 70 μm 2.756 mil |
Linearity | ±0.1 % F.S. | ||
Temperature characteristic | 0.03 % F.S./℃ | ||
Light source | Red semiconductor laser Class 2 [JIS/IEC/GB/FDA (Note 2)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil | ||
Beam diameter (Note 3) | ø50 μm 1.969 mil approx. |
ø70 μm 2.756 mil approx. |
ø120 μm 4.724 mil approx. |
Supply voltage | 12 to 24 V DC ±10 %, Ripple P-P 10 % or less | ||
Power consumption | 40 mA or less (at 24 V DC supply voltage), 65 mA or less (at 12 V DC supply voltage) | ||
Control output | <NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (Between control output to 0V) • Residual voltage: 1.5 V or less (At 50 mA sink current) • Leakage current: 0.1 mA or less<PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (At 50 mA source current) • Leakage current: 0.1 mA or less |
||
Output operation |
Switchable between either Light-ON or Dark-ON | ||
Short-circuit protection | Incorporated (Auto reset type) | ||
Analog output | Analog voltage output • Output range: 0 to 5 V (at alarm: +5.2 V) • Output impedance: 100ΩAnalog current output • Output range: 4 to 20mA (at alarm: 0mA) • Output impedance: 300Ω or less |
||
Response time | Switchable between 1.5 ms / 5 ms / 10 ms | ||
External input | <NPN output type> NPN non-contact input • Input conditions Invalid: +8 to +V DC or Open Valid: 0 to +1.2 V DC • Input impedance: 10 kΩ approx.<PNP output type> PNP non-contact input • Input conditions Invalid: 0 to +0.6 V DC or Open Valid: +4 to +V DC • Input impedance: 10 kΩ approx. |
||
Pollution degree | 2 | ||
Operating altitude | 2,000 m 6561.680 ft or less | ||
Protection |
IP67 (IEC) | ||
Ambient temperature | -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉ |
||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Ambient illuminance | Incandescent light : 3,000 ℓx or less at the light-receiving face | ||
Vibration resistance | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||
Cable | 0.2 mm2 5-core composite cable, 2 m 6.5617 ft long | ||
Cable extension | Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable. | ||
Material | Enclosure: Aluminum die-cast, Front cover: Acrylic | ||
Weight | Net weight: 35 g approx. (without cable), 85 g approx. (including cable) |